Rock fall and Avalanche Barrier

Rock fall and Avalanche BarrierDifferent types of barriers are used to avoid mortal results of falling large and small rock or debris. Determining the determination of the potential falling rock weights and the calculation of the impact energy is the key point to decide the type of the barrier.

Geotechnical Design and Solution Ground Improvement Deep Foundation Earth Retention Grouting Technology Injection System Excavation and Stablization Seepage Control Slope Stabilisation Rapid Impact Compaction Deep Soil Mixing Micropile Shotcrete Anchor and Soil Nail Diaphragm Wall Secant Piles Wall Deep Dynamic Compaction Rock fall and avalanche Barrier Sheet pile wall

Technologies

Deep Soil Mixing

Deep Soil Mixing

Deep soil mixing (DSM) is a method in which the soil is mechanically mixed with adhesive binders to increase the strength and bearing capacity of under laying soil to the desired depth. Depending on the soil and water table situation the wet or dry methods are applicable.

Rapid Impact Compaction

Rapid Impact Compaction

Rapid Impact Compaction (RIC) is an ideal method for increasing soil compaction and bearing capacity and reducing the settlement and the risk of liquefaction in loose Sands. This method is fast and economical and is environmental friendly.

Soil Anchorage

Soil Anchorage

Soil anchorage is an active method for stabilizing inclined lands and excavations. In this method soil wall is drilled up to 20 cm and to enough depth, then preassemble steel reinforcement is placed in the drilled hole and the cement bass grout is injected in the hole. Then it is activated by prestressing hydraulic jacks to stabilize the excavation and incline lands.